Axon Digidata 1322A Manuel de l'opérateur télécharger pdf (Page 12)

6 • Installation

c. Install AxoScope or pCLAMP 8 (press the third button). At the end of

installation, a prompt asks if you want to reboot. Select No.

d. Shut down and turn off the computer to connect the Digidata 1322A (it is

not advisable to connect to the SCSI port while the computer is on).

4. Connect the Digidata 1322A to the SCSI adapter.

a. Carefully connect the SCSI cable to the Digidata 1322A and to the SCSI

port.

b. Turn on the Digidata 1322A.

c. Turn on the computer.

d. New Hardware should be found and properly identified as the Digidata

1322A under Windows 95, 98, and 2000. (NT 4.0 is not plug-and-play).

5. Configure the digitizer in AxoScope or pCLAMP.

a. Disconnect all BNC cables.

b. Open AxoScope 8 (or Clampex 8).

c. Go to Configure/Digitizer and select Digidata 1320 in the Digitizer field.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Pas de commentaire

Axon Digidata 1322A Manuel de l'opérateur Page 12